There are also SD Card and USB flash drive inputs on the front panel of the MM2000BT which is compatible with iPod™
(Classic and Nano) via the USB input. The maximum size of the SD Card or USB flash drive is 32GB. If your memory
card exceeds 32GB, the unit will not be able to read the files from the memory cards. You will only be able to play .mp3,
.wma files directly from these memory cards once they are inserted into the front panel of the unit. Press the play/pause
button on the front panel of the unit to begin playing files from your USB /SD Card, press this button againto pause.
Press the NEXT button to move to the next track on either the USB,SD Card or iPod™(Classicand Nano). Press the
PREVIOUS button to move to the previous track on either the USB,SD Card or iPod™ (Classic and Nano) .
NOTE: THE USB INPUT WILL ONLY CONNECT TO A USB FLASH DRIVE OR iPod™(Classic and Nano). DO
NOT ATTEMPT TO CONNECT THE USB INPUT DIRECTLY TO A COMPUTER AS THIS WILL NOT WORK. BE
SURE NOT TO HOOK-UP AN AMPLIFIER OR ANY AMPLIFIED SIGNAL INTO THE RCA INPUT JACK AS THIS
COULD DAMAGE THE MM2000BT. NO OTHER AMPLIFIER IS NEEDED TO POWER YOUR SIGNAL IN ADDITION
TO THE MM2000BT. ALWAYS MAKE SURE THAT THERE IS ONLY ONE AMPLIFIER IN THE SIGNAL PATH.
There are four ¼" inputs on the face of the unit which you can plug microphones directly into. It is important to note that
these inputs are to be used solely by microphones. Do not attempt to use the ¼" inputs for any other use. To use, simply
plug the microphones into the ¼" inputs while the speaker and microphones are in the OFF position. Once plugged in,
power on the unit and microphones. Once turned on, simply turn up the Microphone Volume and the Master Volume.
There are also two XLR inputs on the face of the unit which you can input balanced signal from.
The six microphone inputs have many options which can be controlled on the front panel of the unit. The microphone
volume controls can be found on the front panel of the unit. Use these controls to adjust the volume of the microphones.
Each group microphone inputs has six sound controls on the front panel of the unit, a treble control, a middle tone
control, a bass control, an echo control, a volume control for XLR input and a volume control for ¼" inputs. Use these
controls to adjust the sound from the microphones.
Microphone Controls
Connecting Microphones to MM2000BT
Volume and Tone Controls
The volume controls on the face of the unit controls the volume at which the signal is played at. Turn the volume
controls clockwise to increase the volume and counter-clockwise to decrease the volume.
MM2000BT
Programming the FM Tuner
Set the input to Tuner. Then press the Play / Pause button to scan for all the available stations from lowest frequency to
the highest frequency. The unit will automatically save all the stations searched and start to play the first station saved
after searching. You can press the NEXT button (9) or PREV button (10) to go to the next or previous saved station.
USB Flash Drive & SD Card & iPod
™(Classic and Nano)
