P-4
White Color Dimmer Mode:
When all three colors (Red, Green and Blue) are set to the same intensity the color will output WHITE.
Press the menu button until u”XXX” (white) appears on the screen. The u”XXX” setting is a new setting
creating a shortcut to have the unit display a white output. Instead of manually setting red, blue and
green to the same intensity, just set the u”XXX” to the desired setting and it will automatically adjust the
red, blue and green settings. For example, setting the unit to u255 will automatically create the
following settings; r255, G255 & b255. This is display the maximum intensity white output.
To display the minimum intensity white output, set the unit to u001.
Once the u”XXX” setting has been created you can manually adjust the red, green and blue settings as
well. However, if the u”XXX” setting is adjusted it will once again reset the other three colors.
Demo Mode:
To set the unit to display in demo (demonstration) mode press the menu button to
Sound Activated Mode:
To set the unit to output the LEDs based on the sound in the room, press the menu button to
Master / Slave Mode:
When linking multiple LGSPOT18 units without the use of a DMX controller use the Slave feature to
have one LGSPOT18 control the output of all the other LGSPOT18 units. Connect the LGSPOT18 units
to each other using the XLR inputs and outputs. Set all of the units that you want to be controlled to
the setting. Then program the controlling unit to the settings you would like to see displayed.
The master / slave feature allows you to control multiple units without having to physically go to each
unit and alter the settings allowing you to quickly adjust the color output throughout the entire venue in
seconds.
3 Channel Mode:
When using the LGSPOT18 together with a DMX controller, set the LGSPOT18 to one of the settings
as d000 – d512 to determine the address of the respective LGSPOT18. For example, setting a
LGSPOT18 to d001 will allow the DMX controller to set the Red, Green and Blue settings by making
adjustments on the CH1, CH2 and CH3 settings of the DMX controller.
DMX
Channel
Value
Controls
CH1
0
Red off
1- 255
From dark to bright
CH2
0
Green off
1- 255
From dark to bright
CH3
0
Blue
1- 255
From dark to bright
LGSPOT18
