on the USB flash drive or SD card inputs.
The unit’s default setup is repeating all tracks. Press this
button once to repeat the current track, press again to play random tracks, press three times to repeat
all tracks.
The IA1000 is able to determine if the current track is the original track or if it was made using the
IA1000’s recording feature. When playing an original track, the words “MP3” will appear on the display screen.
When playing a track that was created using the IA1000’s recording feature
,
the words “MP3” will NOT appear
on the display screen. To delete a recorded track press and hold the Repeat / Random button for several
seconds. Please note the IA1000 will only be able to delete recorded tracks created using the IA1000’s
recording feature.
6.Previous Button:
Press this button to go back to the beginning of the current track or to the previous track
on either the USB flash drive or SD card.
7.Next Button:
Press this button to go to the beginning of the next track on either the USB flash drive or
SD card.
8.Bass Control:
Use this knob to adjust the bass on the main output.
9.Treble Control:
Use this knob to adjust the treble on the main output.
10.Balance Control:
Use this knob to change the balance of the left and right channels.
11.Headphone Output:
Connect your headphone here. Make sure the volume level of the unit is turned
down before making the connection.
12.Input Slector Knob:
When you have decided which input you wish to play,turn this knob until it aligns
with the corresponding input.For example, if a DVD player is connected to the DVD input on the rear of the
unit, turn this knob until it points to DVD.
13.MP3 Input:
Connect your MP3 player here. Make sure to set the input selector knob to MP3 to play the
signal from the MP3.
14.Volume:
Use this knob to adjust the master volume output.
IA1000
