P-7
1.
USB / SD Card/Bluetooth Control Console: There are two USB / SD Card Control Consoles, Channel 1 &
Channel 2. After inserting a USB flash drive / SD Card into the input terminal press be sure to set the input
selector (13) to USB/SD, then press the mode button to choose between audio from the USB or SD Card input or
Bluetooth. If you want to use the bluetooth on Channel 2
，
check the below steps.
Bluetooth function is
available on Channel 2 only.
STEPS FOR CONNECTING WITH BLUETOOTH DEVICE
A. Set the Channel 2 Input selector to USB2/SD2/BT then press MODE button on Ch 2 and enter into bluetooth
mode.
B. Search on the bluetooth device and you can find the bluetooth name “ DJ2PB”
C. Select the DJ2PB bluetooth name and wait for the device to pair. The screen will display “SEARCHING”.
D. The DJ2PB will emit a noise confirming that the devices have successfully paired and screen will display
“BLUETOOTH CONNECTED”
E. Once paired you can play music from your bluetooth device. You can also use the control buttons on the unit to
select the tracks from your bluetooth device.
Use the other controls, play/pause, stop, repeat (Current track / All tracks), previous track & next track to play
audio from the USB flash drive / SD Card.
****NOTE: The USB input is ONLY mean to connect to a USB flash drive (thumb drive). Connecting a MP3
player or computer directly to the USB flash drive input will result in the unit failing to play the audio
from those devices.****
There is a 1/8” (AUX) input on the rear of the unit designed to connect to a MP3 player or computer.
USB / SD Card Control Console Display Screen
(1) Search mode: When the word FOLDER is flashing on the screen, the unit is in FOLDER SEARCHING mode.
Turn the FOLDER/TRACK knob to search through the folder. Press the FOLDER / TRACK knob to choose
a track.
Upon exiting the folder mode, the word ALL will appear on the screen. This indicates that the unit will play
all the tracks from the USB flash drive / SD Card.
When the REPEAT button is pressed, there will be 6 different displays depending on the
setting you choose; ALL / NORMAL / SINGLE / FOLDER / RANDOM / BROWSE.
(2) Input Source: The display will show U when set to USB mode and S when set to SD card mode. Press the
mode button to switch from one input to the other.
(3) Track Number: The track number (for all tracks on the entire flash drive) will appear here. In the picture
above the unit is playing track number 1.
(4) Track or Folder Information: The name of the folder will appear here. In the picture above the folder being
played is named MUSIC.
(5) Elapsed Time: The elapsed time of the current track will display here.
DJPACK2GO
