![background image](http://html1.mh-extra.com/html/technical-pro/dj5u/dj5u_user-manual_1067859004.webp)
P-3
12. Play / Pause Button: When the Channel 2 input selector is set to USB/SD, press this button to pause the
signal from the USB flash drive or SD card connected to the USB/SD input. Press this button again to play.
The play/pause function will only work for the USB flash drive & SD card inputs.
13. Previous Track Button: When the Channel 2 input selector is set to USB/SD, Press this button to go back
to the beginning of the previous track on either the USB flash drive or SD Card inputs.
14. Next Track Button: When the Channel 2 input selector is set to USB/SD, Press this button to go forward
to the beginning of the next track on either the USB flash drive or SD Card inputs.
15. Microphone ¼” Input: Connect your microphone to this ¼” input. The microphone volume will be
controlled by the microphone volume knob (1).
16. Headphone Output: Connect your headphone here. Make sure the headphone volume knob (21) is turned
down before making the connection. The output of the headphones will be determined by the Monitor Selector (19).
17. Bass Control: Turn this knob in order to increase the bass for channels 1-4
18. Balance Control: Use this knob to adjust the balance to the right or left. To keep the balance centered
keep this knob is the center position.
19. Monitor Selector: Use this knob to select which channel(s) will be played through the headphone output.
Select CH1 to hear Channel 1 through the headphones (etc..). Select Mic to hear the microphones through
the headphones. Select Main to hear all channels / microphones through the headphones. Be sure to have
the headphone volume knob (21) turned down, until you are ready to use the headphones and then slowly
turn up the volume.
20. CH2 / CH3 Crossfader: The crossfader will allow you to mix the audio from channels 2 & 3 and play that
audio through the outputs. Set the crossfader to the left to hear channel 2 only. Set the crossfader to the
right to hear channel 3 only. Set the crossfader to the middle to hear both channel 2 & 3.
21. Headphone Volume Knob: Turn this knob to increase or decrease the volume of the headphones. The
volume should be set to zero and then slowly turned up.
DJ5U