Technica MediaGateway, Руководство пользователя

Страница: 76 / 108

MediaGateway

User Manual 76
4 Configuration Examples
Note : Best practise is using double tagging, because a lot of systems have already
single tagged communication. For the routing through the MediaGateway a further
level is needed, and this is done by the double tag.
Note : It makes sense to configure the configuration port first. The connection between
a PC and the MediaGateway for access to the webserver on the microcontroller is the
same as any other connection through the MediaGateway. => S1-P4 to PC-port must
be configured.
4.1 Logging communication between two DUTs
The picture shows a standard use case for
logging the communication between 2
devices (e.g. ECUs). The line between
DUT_1 and DUT_2 must be cut in two
pieces and reconnected by the
MediaGateway. The RJ-45 port in the
middle is for logging the communication
between these two DUTs and the very left
RJ-45 Port is for configuration of the
MediaGateway.
It is recommended to use double tagging,
especially if the logged network is already
working with singleVLAN tags.
Steps to configure your MediaGateway :
Take a MediaGateway in default configuration. For resetting the MediaGateway,
please see C
HAPTER
2.2.2
Connect all devices as shown in the picture, for configuration at least the PC is
necessary.
Don’tforget the power supply for the MediaGateway and don’t forget to
configure your network adapter (See C
HAPTER
3.1 )
Open a web browser and type 192.168.0.49
Figure 4-1: Example for logging 2 DUTs