100/1000BASE-T1 Media Converter MATEnet
User Manual
6
conditions not be met. Protection against overvoltage cannot be provided in such a
breach of the conditions of use.
1.1.5
General design rules for the power supply of TE products
The power supply solution of Technica Engineering’s products is equipped with a self
-
protection mechanism. This automatic function protects the internal electronic
components against excessive temperature and too high supply voltage by switching
the device off. This automatic switch-off function is independent of any software
function. Excessive temperatures in the device can be caused by high environmental
temperatures or internal failures of the device. The device can protect itself by shutting
down its power supply avoiding further damage to itself.
The operator/user of these devices must take measures for the right protection of the
power supply lines and the according to the connector. The maximum power
consumption of the Technica Engineering products is written in this user manual.
Please consider that some of the products are working with a step-up converter. So,
the current needed in case of undervoltage conditions must be considered higher than
a nominal voltage level. The user must choose the right fuse and/or other over current
protection measures.
1.2
Warranty and safety information
Before operating the device, read this manual thoroughly and retain
it for your reference.
The latest documentation for the 100/1000BASE-T1 Media Converter
MATEnet can be downloaded
Use the device only as described in this manual.
Use only in dry conditions.
Do not insert any foreign object in the slots/openings of the housing.
Do not apply power to a damaged device.
The device may only be used by specialists.
Do not open the device. Otherwise, the warranty will be lost.