Technibel K70P090Z, Инструкция по установке

Страница: 9 / 16

GB
9
13 - HEATING ELEMENT
• The electric heater element ensures the main heating function in the 2-pipe C heating element configuration.
Note :
The presence of the Rater sensor is compulsory for this operation.
13.1 - SELECTION
• If provided for in the configuration, the heating element can be selected in the heating mode by pressing the Cey.
13.2 - ACTIVATION ACCORDING TO THE AMBIENT TEMPERATURE
• If use of the heating element is selected by the user, it Rill be
activated on a call from the thermostat based on the room
temperature.
• Note :
The activation involves forced ventilation at medium speed.
13.3 - DISPLAY
• The display Rill shoR the folloRing information:
Heating provided by the heating element:
- Heating element in operation: steadily lit symbol .
- Heating element not active at this point: flashing symbol .
ON
OFF
Set Set - 0.5°C
Ambient air
temperature
14 - “ECO” MODE
• The “ ECO ” mode foresees a correction of the setpoint by 2.5 °C and forcing of the fan at minimum speed to reduce the unitgs
operation.
• Cooling : se 2.5°C .
• Heating : setpoint – 2.5°C .
14.1 - ACTIVATION
• The “ECO” mode is activated by the Cey.
• Proceed in the same manner to deactivate the “ ECO ” mode.
14.2 - DISPLAY
• On the monitor, the “ ECO ” mode is activated: symbol .
15 - “FROST PROTECTION” MODE
• With the thermostat being “ OFF ”, this logic prevents the ambient temperature from dropping too loR; the unit is thus forced into
heating mode.
If the electric heating is present, it Rill be used only if it had been previously selected.
15.1 - SELECTION
• To select the “ Frost Protection ” mode, Rith the thermostat set to “ OFF ”, simultaneously press the Ceys .
• The same Cey combination disables this function.
15.2 - ACTIVATION
• If this control is selected, the unit Rill sRitch on Rhen the room
temperature falls beloR 9°C.
• When temperature exceeds 10°C the thermostat Rill resume the
OFF status.
• Note :
Any OFF command from digital input Rill disable this logic.
15.3 - DISPLAY
• The display shoRs the folloRing information:
- “ Frost Protection ” mode control active: symbol .
- “ Frost Protection ” mode control inactive:
Defr
indication.
ON
OFF
10°C 9°C
Ambient air
temperature
“ Frost Protection ”
mode active
“ Frost Protection ”
mode inactive