Technibel DSAF124MR5IAA Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 23

Technibel DSAF124MR5IAA Скачать руководство пользователя страница 20

Setting the 1-Hour OFF Timer

1. 1-Hour OFF Timer

This function causes the unit to operate for one hour and then stop,
regardless of whether the unit is on or off when this button is pressed.

The

indicator in the display indicates that this function is operating.

Setting the 1-Hour OFF Timer:

Regardless of whether the unit is operating or stopped, press the 1 HR.
TIMER button.

appears in the display.

Cancelling the 1-Hour OFF Timer:

Press the ON/OFF operation button to turn the unit off, wait for the unit to
stop operating, and then press the ON/OFF operation button again. The 1-
Hour Timer function is now cancelled and the unit operates normally.

NOTE

If, while the 1-Hour Timer function is operating, the 1 HR. TIMER button is
pressed once to cancel the function and then again, the unit continues to
operate for one hour from that point in time and then stops.

•

The 1 Hour OFF Timer setting is given priority over the DAILY ON/OFF
REPEAT setting.

•

It is not possible to use the OFF Timer and 1-Hour OFF Timer together.
Whichever function is set last takes precedence. If the 1 HR. TIMER
button is pressed while the TIMER OFF function operates, the OFF
Timer is cancelled and the unit will stop operating one hour later.

2. Operation together

with the DAILY ON/
OFF REPEAT Timer

Setting the HIGH POWER Operation

1. HIGH POWER Operation

This function causes the unit to operate at HIGH POWER in the present
mode of operation for 15 minutes when this button is pressed while the
unit is on. The

indicator on the display indicates that this function is

operating.

Canceling the HIGH POWER operation

HIGH POWER operation is canceled by pressing the ON/OFF operation
button, HIGH POWER button (when it is pressed again) or MODE selector
button, when the OFF time or HIGH POWER time setting is reached or
when the ECONOMY mode operation is performed. The 15-minute timer
is also cleared.

It is not possible to use the HIGH POWER operation and ECONOMY mode
operation together. Whichever function is set last takes precedence.
If the HIGH POWER button is pressed while the ECONOMY mode is
operating, the ECONOMY mode operation is cancelled and the unit will
change to the HIGH POWER operation.

2. Operation together with

the ECONOMY mode

20

«
...
18
19
20
21
22
...
»

Содержание DSAF124MR5IAA
























Отзывы:

Нет отзывов