P.11
RTA-7002
P.11
1st: Insert the drawers into the cabinet, the bottom drawer first, then the top drawer.
The top drawer might need to be inserted at an angle with its front facing down.
2nd: Assemble the handle (26) to the door (19) using screws (H).
3rd: Insert the Grommet (23) into the hole of the tabletop (1).
4th: Assemble the hinges (25) to panel (8) using screws (I).
5th: Assemble the door (19) to the hinges (25) using screws (I). The adjustment of the
hinges is explained below.
STEP 18
Screws:
H
M4x22mm
2
pcs
I
3.5x14mm 12
pcs
☛
If the door does not close properly, you
can adjust the alignment of the hinges by
adjusting the following screws:
Adjusts the depth.
DONE! Before you start using the unit, make sure that all the screws, bolts, cam locks,
etc. are properly tightened, and read all the warnings in the next page.
☛
If the drawers don’t fit properly, verify the
correct assembly of the sliders as explained
in page 5 step 2 and page 10 step 17.
