Techni Mobili RTA - 2336, Руководство по сборке

Страница: 7 / 15

RTA-2336 P.7
ASSEMBLY STEPS:
15
11
12
SCREWS
D
2PCS
6X15 MM
SCREWS
A
4PCS
3X15 MM
SCREWS
4PCS
4X35 MM
E
12
8
8
Left
Right
SCREWS
A
4PCS
3X15 MM
1 2
3
4
Use screws A to assemble the Drawer Connects (15)
to the Drawer Left and Right Panels (11 & 12).
9
11
12
10 &
Use screws D to assemble the Drawer Connects (15)
to the Top Drawer Front Panel and Bottom Drawer
Front Panel (9 & 10).
Slide in the Drawer Bottom Panel (13).
Use screws E to assemble the Drawer
Back Panels (14) to the Drawer Left and
Right Panels (11 & 12).
Grab the 2 sets of the Drawer Sliders (8) and separate the flat
ones from the “L” shaped ones. Place the drawer upside-
down as shown and use screws A to assemble the “L” shaped
Sliders to the Drawer Left & Right Panels (11 & 12) as shown.
IMPORTANT: REFER TO THE DRAWINGS FOR THE CORRECT
POSITION OF THE SLIDERS.
If they get installed incorrectly,
the drawers will raise 1" with a gap at the bottom and the top
drawer will not close!
REPEAT STEP 3 TO 4 FOR THE OTHER DRAWER
11
12
13
11
12
14