ASSEMBLY STEPS
Use the wrench to install the casters
2
to the structures
1L
and
1R
in the
following order:
☛
The locking casters
2L
go on the
front bottom holes
,
☛
The non-locking casters
2N
go on the
back bottom holes
.
STEP 1
Screws/Tools:
P.5
RTA-2018
P.5
First check and make sure of the correct alignment of the inserts in the
back panel
3
, then assemble it to the structures
1L
and
1R
with screws
A
.
STEP 2
Screws/Tools:
A
M6x45
4
Pcs
L
N
Locking at front
Non-locking at back
Panel 3 comes with pre-aligned metal inserts on its interior face. If the
screws don’t want to enter in the panel, you will have to use the Allen
wrench to turn and re-align the inserts as shown below.
The middle and
lower bars face
towards the
inside.
If the insert is misaligned,
turn it to the correct direction:
NO
X
YES √
Scan QR Code to
view this step
