12
Remote Control Functions
This fixture includes an IR remote control that can be used to make settings and operate the
unit manually. It can be used without the need for a DMX controller and in standalone
applications. The remote uses IR technology to communicate with the fixture, so it is important
that the remote be aimed at the light directly. If more than one unit is nearby, it may require you
to get closer to the unit when trying to independently set one unit only. Several may respond to
the same IR signal.
Function of buttons
Function of buttons
Button Function
BLACKOUT
LED off
SPR
Built-in programs, adjust via “-/+” to select the 3 scenes.
FL
Flash on/off, adjust speed via “-/+”
SP
Speed control, via “-/+” to adjust the color change speed and dream
fade speed
D
DMX mode
SA
Not in use
SL
Master/slave mode
S
Setting DMX address using the numeric 0, 1, 2, 3 ,4 ,5, 6, 7, 8, 9
R(red)
，
G(green)
B(blue)
Static color, via “-/+” to adjust the brightness of R/G/B
Using the remote to set the DMX address
The following are the steps to follow to set the DMX address using the Remote control. In
this example, the fixture is set to DMX start address of 246.
Note:
When entering lower DMX addresses, use zeros in the front, ie; 001 or 034.
Steps for setting DMX with the remote
Step Function
1
Press S (unit indicates by RED On)
2
Then press 2, (unit indicates by Green On)
3
Then press 4, (unit indicates by Blue On)
4
Then press 6, (unit indicates by RGB White
On)
