Techni-Lux CT-OPERATOR, Руководство пользователя

Страница: 8 / 8

DMX Operator
Page 8
MIDI Control Mode
A single Midi Channel can be used to control the output functions of the controller. Note numbers are used to turn
on/off the Scenes in Banks 1-15, Chases 1-6 or the BLACKOUT function.
Set MIDI Channel Number
1) While in the Run Mode (Programming LED off), press and hold the MIDI/ADD button until the right two digits of
the display begin to flash.
2) Use the BANK UP/DOWN buttons to display the MIDI Channel to which the controller will respond.
3) Press the BLACKOUT button to save. <Done>
MIDI Note Chart
NOTE # FUNCTION
0 SCENE 1
1 SCENE 2
2 SCENE 3
3 SCENE 4
4 SCENE 5
5 SCENE 6
6 SCENE 7
7
BANK 1
SCENE 8
8-15 BANK 2 SCENE 1-8
16-23 BANK 3 SCENE 1-8
NOTE # FUNCTION
24-31 BANK 4 SCENE 1-8
32-39 BANK 5 SCENE 1-8
40-47 BANK 6 SCENE 1-8
48-55 BANK 7 SCENE 1-8
56-63 BANK 8 SCENE 1-8
64-71 BANK 9 SCENE 1-8
72-79 BANK 10 SCENE 1-8
80-87 BANK 11 SCENE 1-8
88-95 BANK 12 SCENE 1-8
96-103 BANK 13 SCENE 1-8
NOTE # FUNCTION
104-111 BANK 14 SCENE 1-8
112-119 BANK 15 SCENE 1-8
120 CHASE 1
121 CHASE 2
122 CHASE 3
123 CHASE 4
124 CHASE 5
125 CHASE 6
126 BLACKOUT
Trouble Shooting
Display and LEDs do not light. -Check that power is connected and of correct voltage/polarity
Fixtures do not see data -Check DMX Polarity Switch
-Check data lines
One or more Fixtures can not be controlled -Check that affected fixtures have valid Start Addresses.
-Check data lines
Program data is not saved -Controller was not in PROGRAM MODE
A CHASE doesn’t run all SCENEs in a BANK -All blank SCENEs (all channels set to “0”) will be skipped by a chase