4
External Connectors
• All Rights Reserved. No part of this document may be photocopied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means whether, electronic, mechanical, or otherwise
without the prior written permission of TechNexion Ltd.
• No warranty of accuracy is given concerning the contents of the information contained in this publication. To the extent permitted by law no liability (including liability to any person by reason of
negligence) will be accepted by TechNexion Ltd., its subsidiaries or employees for any direct or indirect loss or damage caused by omissions from or inaccuracies in this document.
• TechNexion Ltd. reserves the right to change details in this publication without notice. Please download the most updated version at: https://www.technexion.com/support/download-center/
TEP-1560-BSW
TEP-1010-BSW
Phone: +886-2-82273585 Web: www.technexion.com
16F-5, No. 736, Zhongzheng Road, ZhongHe District, 23511, New Taipei City, Taiwan
© 2001-2018 TechNexion Ltd.
2018-12-13
5.1.1
Galvanic Isolated Serial Port Connector (RS-XXX) (optional)
5.1
Galvanic Isolated Connectors Pin Definition (TEP1010-xxxxx-Rxx-Lxxx-
XG21
-xxxx-xxx-xxxx) (optional)
5
Additional I/O Connectors: GPIO1, GPIO2, and RS-XXX (optional)
Header: Molex 43045-1000 (10-pin Micro-Fit 3.0).
Cable receptacle: Molex 43025-1000 (10-pin Micro-Fit 3.0) plug with crimp contact Molex 43030-0007.
Header: Molex 43045-1000 (10-pin Micro-Fit 3.0).
Cable receptacle: Molex 43025-1000 (10-pin Micro-Fit 3.0) plug with crimp contact Molex 43030-0007.
Port
Pin #
RS-232 + RS-232 RS-232 + RS-422 RS-232 + RS-485 Device
1
GND
GND
GND
COM1
COM1
COM1
COM1
COM2
COM2
COM2
COM2
2
SERIAL1A_TXD
SERIAL1A_TXD
SERIAL1A_TXD
3
SERIAL1A_RXD
SERIAL1A_RXD
SERIAL1A_RXD
4
SERIAL1A_RTS
SERIAL1A_RTS
SERIAL1A_RTS
5
SERIAL1A_CTS
SERIAL1A_CTS
SERIAL1A_CTS
6
GND
GND
GND
7
SERIAL1B_TXD
SERIA S
8
SERIAL1B_RXD
SERIAL1B_RXD
NC
NC
SERIAL1B-
9
SERIAL1B_RTS
SERIA
SERIAL1B_TXD-
10
SERIAL1B_CTS
1
2
3
4
5
6
7
8
9
10
RS-XXX:
5.1.2
Galvanic Isolated Digital I/O Connectors (GPIO1 / GPIO2) (optional)
5.2.1
Non-Galvanic Isolated Serial Port Connector (RS-XXX) (optional)
The dual 4-wire galvanic isolated serial port is set by default as follows: The primary and secondary serial ports are both set as RS-232 during manufacturing. For setting details of
the TEP-1010-BSW/TEP-1560-BSW serial ports in other modes, please refer to the TEP-1010-BSW/TEP-1560-BSW HARDWARE MANUAL.
This product is available with three optional connectors: GPIO1, GPIO2, and RS-XXX that can be ordered in either a galvanic isolated or non-galvanic isolated version.
For detailed settings information of the TEP-1010-BSW/TEP-1560-BSW GPIO ports, please refer to the TEP-1010-BSW/TEP-1560-BSW HARDWARE MANUAL.
The dual 4-wire non-galvanic isolated serial port can be configured as follows: The primary and secondary serial port can only be used as a standard RS-232
The unit is by default preloaded with software that can download and install a selection of Linux OS images over hardwired network. Simply connect a network to the
unit through the Ethernet LAN RJ45 connector and power it up, then follow the steps on the screen to load the software. Local proxies will interfere with this process.
For more information, go to our Knowledge Base at: https://www.technexion.com/support/knowledge-base/
To download drivers for the Windows operating systems, go to our Download Center at:
https://www.technexion.com/support/download-center/
For more information about installing and configuring the Windows operating systems, see: https://msdn.microsoft.com/en-us/
6
Software and Driver Installation
5.2
Non-Galvanic Isolated Connectors Pin Definition (TEP1010-xxxxx-Rxx-Lxxx-
XS21
- xxxx-xxx-xxxx) (optional)
Description
No.
No.
Description
1
2
3
4
5
6
12
13
14
15
16
7
8
9
10
11
17
18
19
20
21
LED Light indicator
Micro-SIM cardslot
MicroSD cardslot
USB OTG (Type-C) connector
LAN2 RJ45 connector
USB 2.0 Host connector
USB 2.0 Host connector
USB 3.0 Host connector
USB 3.0 Host connector
miniDP connector
HDMI connector
3.5mm jack Line out
3.5mm jack Line in
3.5mm jack Mic in
Reset button
Power button
Power Input connector
LAN1 RJ45 connector (PoE)
GPIO1 connector (optional)
GPIO2 connector (optional)
RS-XXX (Serial Port) connector (optional)
1
2
3
4
5
6
7
8
9
10
Port
Pin #
RS-232 + RS-232
Device
1
2
3
4
5
7
6
8
9
10
GND
SERIAL1A_TXD
SERIAL1A_RXD
SERIAL1A_RTS
SERIAL1A_CTS
GND
SERIAL1B_TXD
SERIAL1B_RXD
SERIAL1B_RTS
SERIAL1B_CTS
COM1
COM1
COM1
COM1
COM2
COM2
COM2
COM2
GPIO1A
GPIO1B
GND_DIO
GND
GPIO1C
GPIO1D
VCC_DIO
VCC
Max. 5.25V
Max. 5.25V
Max. 12.39V
Max. 12.39V
Max. 12.39V
12V
DIG_IN1
DIG_IN2
Ground for digital I/O
Common Ground
DIG_OUT5
DIG_OUT6
Supply Output
DIG_IN1
DIG_IN2
Ground for digital I/O
Common Ground
DIG_OUT5
DIG_OUT6
Supply Output
GPIO2A
GPIO2B
GND_DIO
GND
GPIO2C
GPIO2D
VCC_DIO
VCC
Port
Pin # GPIO1 Signal GPIO1 Description
GPIO2 Signal GPIO2 Description
Voltage
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Header: Molex 43045-0800 (8-pin Micro-Fit 3.0).
Cable receptacle: Molex 43025-0800 (8-pin Micro-Fit 3.0) plug with crimp contact Molex 43030-0007.
GPIO1/GPIO2:
Header: Molex 43045-0800 (8-pin Micro-Fit 3.0).
Cable receptacle: Molex 43025-0800 (8-pin Micro-Fit 3.0) plug with crimp contact Molex 43030-0007.
5.2.2
Non-Galvanic Isolated Digital I/O Connectors (GPIO1 / GPIO2) (optional)
For detailed settings information of the TEP-1010-BSW/TEP-1560-BSW GPIO ports, please refer to the TEP-1010-BSW/TEP-1560-BSW HARDWARE MANUAL.
GPIO1/GPIO2:
GPIO1A
GPIO1B
NC
GND
GPIO1C
GPIO1D
NC
VCC
DIG_IN1/OUT1
DIG_IN2/OUT2
Common Ground
DIG_IN5/OUT5
DIG_IN5/OUT6
Supply Output
3.3V
3.3V
3.3V
3.3V
12V
DIG_IN1/OUT1
DIG_IN2/OUT2
Common Ground
DIG_IN5/OUT5
DIG_IN5/OUT6
Supply Output
GPIO2A
GPIO2B
NC
GND
GPIO2C
GPIO2D
NC
VCC
Port
Pin # GPIO1 Signal GPIO1 Description
GPIO2 Signal GPIO2 Description
Voltage
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
RS-XXX:
Bottom view:
4
3
6 8 10
5
14 15
11 12 13
16
2
1
9
7
18
19 20 21
17
Supply output for digital I/O
Supply output for digital I/O
7 9
17
19 20 21
18
4
1 2 3
5 6 8 10 11 12 13 14 15 16
3
4
All manuals and user guides at all-guides.com
