technetix G.hn Powerline Wi-Fi, Настройка, Страница: 6 / 40

LINK LED
Flashing LED:
Traffic being sent over
the Powerline network.
Wi-Fi-LED
Fast flashing LED:
traffic over Wi-Fi .
Slowly flashing LED:
WPS is in progress.
LED turns red:
WPS has failed.
1.
2.
3.
Power LED
Flashing LED:
device is trying to
establish a link with
another unit.
Ethernet
connection
Connect the CAT6
patch cable here for
Ethernet connection.
1. On/off button
Power off the unit
(settings will be saved).
2. Link Button
Press for 3 seconds.
Unit will try for up to
120 seconds to establish
a link with another unit.
3. Wi-Fi protected
setup (WPS) button
Press once. Unit will allow
one device access to the
encrypted network without
physically entering the
password. For example:
Select the Technetix Wi-Fi
network on your phone or
laptop, press the Wi-Fi WPS
button at the same time as
entering the password on
your phone or laptop (this
will not work on all devices
for safety reasons).
Factory reset button
Press for 10 seconds to
reset the Powerline link.
Press for 15 seconds to
reset the Wi-Fi
configuration.