technetix AIMA3000-FT5E, Руководство пользователя

Страница: 25 / 28

23
Oct/2017 - V1 Technetix Group Limited
Product User Manual
AIMA-FT5E
6 Troubleshooting
Table 6-1 FT5E troubleshooting
Indicator Light Status Malfunction Cause Troubleshooting / Solution
RF
BC input power value is either
comparatively low or high Adjust input signal power to achieve normal BC input signal. If the BC input power
is normal but the alarm is still on, contact technetix technical support.
RF
BC input power value is either too
low or too high Adjust input signal power to achieve normal BC input signal. If the BC input power
is normal but the alarm is still on, contact Technetix technical support.
STAT
Optical output power and bias
current values are not within the
normal range
Contact Technetix technical support.
Power supply failure Contact Technetix technical support.
Temperature is too hot
Reduce the temperature in the surrounding environment of the product. If
the temperature of the environment is normal but the alarm is still on, contact
Technetix technical support.
Note:
The RF light is an indicator for NC and BC channels. The 'NC Input Power' in the FT5E module is set to off by default. If
the main and secondary alarms of the 'NC Input Power' are enabled (HiHi/Hi/Lo/LoLo threshold values selected), check
whether the NC RF signal is normal.