manualshive.com logo in svg

technetix 19012462, Руководство пользователя

Поделиться
Скачать
technetix 19012462 Скачать руководство пользователя страница 4

4

DBC-1200 Lite_User Manual

Installing the configuration software

 

˺

Configuring with Windows laptop:

 

˺

Install BLL application 

 

˺

Connect PC and amplifier with USB A male to USB A male

 

˺

Configuring with Android phone or tablet:

 

˺

Connect phone and amplifier with above USB cable and with USB OTG adapter  
(connected to a phone)

 

˺

Configuring with t-box (WiFi communication):

 

˺

Appropriate USB cable is provided with t-box

The software required to configure a DBC-1200 Lite is dependent on the device used to connect  
to the modules within the amplifier:

 

˺

Laptop – BLL software. This software requires the Windows OS. The latest BLL software can be found  
on our website: 

www.technetix.com

Installation requires a password that can be obtained from your sales representative.

For detailed installation and use of the BLL software refer to the BLL user manual.

 

˺

Android – BLA software. The software requires Android version 4.1 or higher and USB host. 

The latest BLA app can be found on our website: 

www.technetix.com

Installation requires a password that can be obtained from your sales representative.

For detailed installation and use of the BLA app refer to the BLA user manual.

Optional t-box allowing wireless configuration using a laptop , Android device or IOS.

DBC-1200 Lite ordering information

Item code

Description

19012464

DBC-1200 lite 1.2 GHz, 44 dB, 230 VAC 85/102 MHz diplex split

19012462

DBC-1200 lite 1.2 GHz, 44 dB, 65 VAC 85/102 MHz diplex split

19012463

DBC-1200 lite 1.2 GHz, 44 dB, 65 VAC 204/258 MHz diplex split

For specific configurations, please contact your sales representative.

Содержание 19012462





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды