Turn off camera
Under standby mode, long press power key, LED flashes 3x and
turns off. The camera turns off.
Connecting with PC
Power off the device then connect it with PC using USB cable. Do
not have any operation on the device during this connection. If the
device is not read by PC, please re-connect and make sure the
USB driver/cable is alright.
Reset
To reset camera, insert a pin into the reset hole and hold for about
2 seconds. After 1 minute, the camera is reset.
Set Date and Time stamp
The date and time will be revised for video in next recording.
Plug in the USB cable to the camera and to the computer.
Go to <My Computer> or Computer or Explorer.
The camera will be recognized as removable Disk Drive.
Double left click on removable Disk Drive and it will bring
up the Video folder. DO NOT OPEN IT!
Edit the text document named
“time” by double left click
on the “time.txt” document.
Fill
in
the
current
Year-Month-Day
hour:minute:seconds [eg: 2018-01-01 12:00:00 ] ,Go to File and
Save, then close file.
Power off the TX-112 and restart. The device now has the current
date and the current time.
