5. Turning OFF the camera
In the standby/video mode press and hold down the Power/Video button. The red LED flashes
for 3 times and then turns off. When the watch is not used 3 minutes after powered on, it will
power off automatically.
6. Recording a video
6.1.
In the standby/video mode mode press the Power/Video button. The blue LED flashes for 3
times and then turns off. The video recording begins. Meanwhile press shortly any button, the
blue LED flashes for 3 times and reminds you that video recording is running.
6.2.
Press the Power/Video button 2 times to end video recording.
6.3.
If the Power/Video button is pressed down a while, the video will be saved and the camera
will turn off. The red LED will flash 3 times quickly.
Attention:
In case there is not enough memory left, the red and blue LED will flash quickly. After
5 seconds the camera turns off automatically.
7. Taking a picture
7.1.
In the standby mode press shortly the Photo button. The red LED flashes shortly and a
picture will be saved in JPEG format.
7.2.
Then the red LED turns off and the blue LED remains lighting, which indicates that the
camera is still turned on and in standby mode.
8. Separate sound recording
8.1.
In the standby mode press and hold down the Photo button for 2 seconds. The red LED
flashes slowly 3 times and sound recording begins. Press the Photo button 2 times to end the
sound recording.
8.2.
If the Power/Video button is pressed down for a longer time, sound recording will be saved
and the camera will turn off. The red LED flashes 3 times quickly.
9. RESET
When the system crashes down, do a RESET to restart the system. Press down the
Power/Video button (1)
together with
the Photo button (2) at the same time.
10. Connection with a computer
10.1.
Use the USB cable to connect the watch to the PC/Notebook USB port. After that a
“removable disk” occurs on the computer. (If the watch is connected to the PC/Notebook, the
watch begins to work as a removable disk.) Video can now be checked, data can be easily saved,
transferred, copied and deleted.
10.2.
Update date and time of a video
Connect the watch with a PC/notebook and in the rood directory of the watch create a txt.file
named
„time.txt“.
Open this file and then edit the text file.
Example:
2014 03 03 10:30:00
(YEAR MONTH DATE only enter with spaces, means
without any dot, hyphen or minus sign!)
Then close the program and disconnect the USB connection. When the watch is turned on next
time, date and time will be updated automatically. On the recorded video or picture date and time
are displayed as follows: 2014.03.03. 10:30:28
