Placing and switching on the transmitter
Choose a suitable place near your TV or another audio source (e.g.
computer or HiFi system). Connect the power adapter to the DC
jack on the transmitter. When no receiver for charging is put in
place or no input/output is connected to the transmitter. The
GREEN LED on the front of the transmitter will illuminate.
To turn off the transmitter, unplug the power adapter from the wall
outlet.
Charging the headset
Place the receiver on the transmitter. The RED
LED on the front of the transmitter will also light
up.
Refer to the correct positioning like you see in
the picture. The mark
on the top of the
transmitter should be matched with the mark
on the front of the receiver.
When the headphones are fully charged, the
RED LED on the transmitter will turn off.
→
Connecting the transmitter to e.g. TV via headphone jack
Connect one of the 3.5mm plugs of the AUX
–cable with the
connector
on your audio source and the other plug into the “IN” jack
on the TX-99 transmitter. The BLUE LED at the front of the
transmitter will turn on.
→
Connecting the transmitter to e.g. HiFi system via Chinch
Connecting the L (White) / R (Red) RCA plug of the 3.5mm RCA
cable into the Audio
–out L/R socket on your sound source and the
3.5mm plug to the “IN” jack on the TX-99 transmitter. The BLUE
LED at the front of the transmitter will turn ON.
