5
1. Device Structure
Front view
Side view
No. Name
Description
1
White light source
The camera will use these in low-light conditions to generate a
black and white image, even in total darkness.
2
Fixed hole
The camera can be fixed on a wall with screw through this hole.
3
Microphone
Allows the camera to pick up nearby sounds, and stream them
with the video.
4
Lens
The business end of the camera. For a reliable and clear
image, ensure that the lens stays clean and unobstructed. To
clean, use a dedicated lens cleaning solution and cloth,
available from all good photography stores.
5
PIR sensor
This is an electronic sensor that measures infrared light
radiating from objects in its field of view.
6
Antenna
Used to transmit the wireless signal to the router. For the best
results, the antenna should be as unobstructed as possible -
ideally having a clear line of sight to the receiver.
7
Mounting bracket
The supplied mounting bracket can be screwed onto any flat
surface.
8
RJ45
Ethernet connector
For a wired connection, connect this to a spare port on your
home router. So you can use the Security Advanced App on
your mobile device.
9
Reset button
Long press and hold it longer then 15 seconds when the power
is disconnected and reconnected. Attention: all settings will
revert to the factory defaults.
10
Power socket
Connect the power adapter here.(DC12V/2A)
11
MicroSD card slot
Insert a MicroSD card (up to 64GB) for allowing you to capture
a series of snapshots and video files.