Switch button and power indication instructions
(1) Press the SWITCH button 1x, check the balance power and start the product.
(2) Press the SWITCH button for 2–3 seconds to activate the LED flasher. The 3 modes of
LED lights appear in sequence (Strobe, SOS, Fast flashing warning, Off). Press short the
switch button to turn off the device. This device has intelligent shutdown, means, when
it is fully charged and no other device is connected to it for external charging, then it
shuts down automatically to save its energy.
(3) Balance power indication
Press the SWITCH button. Then the power indicator
lights are on.
5 LEDs are lighting in BLUE, balance power is about 100%
4 LEDs are
are lighting in BLUE and 1LED in RED, balance power is about 80%
3 LEDs are lighting
in BLUE and 2 LEDs in RED, balance power is about 60% (From this capacity status on,
please do not start your car any longer with the TX-78!)
2 LEDs are lighting in BLUE
and 3 LEDs in RED, balance power is about 40%
1 LED is lighting in BLUE and 4 LEDs
in RED, balance power is about 20%
1 LED is lighting in RED, balance power is about
10%
NO LED is lighting, balance power is about 0%.
(4) Charging power indication
Connect the charger to the device and then the
power indicator lights flash.
1
st
LED flashes, charging power is about 0%–10%
2
nd
LED flashes, charging power is about 10%–20%
3
rd
LED flashes, charging power is
about 20%–40%
4
th
LED flashes, charging power is about 60%–80%
When 5 LEDs
are on, the device is fully charged.
(3) Charging the device
Use the 15V/1A home charger or the 12V/1A car charger to charge the device, when all 5
LEDs are on (that means the device is fully charged). Disconnect the device to save the
power.
