Functions and Applications
Outdoor Unit Starting Up
Connect to external power to start up. If the power source is only battery, main
MCU is waken about every one second. Sleep mode saves power (Monitor and
alarm functions could be realized in both two power supply conditions.).
When external power and battery supply power simultaneously, the effect is
same to external power supports the unit only, when battery is in low power, the
external power will charge the battery automatically, it recovers to its previous
state when the battery is full.
Indoor Monitor Starting Up
Plug in 9VDC power, long press OK key about 3 seconds to start up (about 1
second after shutdown), logo shall be displayed on screen with a sound of “Beep”.
Turn into standby mode.
Display: standby picture, signal sign, power sign, time & date
Blue LED flashes every 4 seconds.
In this mode, the screen shall be dimmed after some seconds and turns into
power saving mode.
If there is any calling record under this mode, red LED flashes every 1 second
and stops flashing after checking.
In standby mode, long press OK key about 3 seconds, Shutdown shall be
displayed on screen with a sound of “Beep”, the unit switches off.
Outdoor Unit Call Indoor Monitor
In standby time mode, press Door bell key to call, the blue LED of the outdoor
unit lights up with a sound of “Du Du”. Blue LED of indoor monitor lights up, the
screen shows image and the unit rings for maximum 30 seconds. If there is no
reply signal from indoor monitor, the outdoor unit stops the Call and recall is
allowed.
Intercom: press OK on indoor monitor
ring stop and the unit turns into
intercom mode, red LED of indoor monitor is off as well as blue LED is on,
intercom time is maximum 90 seconds.
Monitor: press
monitor key on indoor monitor
red LED lights up,
monitor outdoor voice without being discovered by the visitors. (One or both way
intercom could be changed over by pressing
and OK, and it will time again
till 90 seconds.).
Unlock: in OK on-state mode
press
unlock key
after successful
unlocking, it shows unlock icon.
Take a photo: in OK on-state mode
press
photo taking key
one
press one photo, the photos will be stored in MicroSD card.
Video Recording: in OK on-state mode
press
video taking key
start taking video
press
video taking key again to stop, the videos will be
stored in MicroSD card.
Exit: in OK on-state mode
press OK key, the unit turns into standby mode
with a sound of “Beep”.
Automatic video: if nobody answers the call in 5 seconds, indoor monitor
starts taking video automatically (Default is automatic video. If setting is manual
video, once connected, the indoor unit will take video manually) till being stopped
or maximum taking time.