Setting Time and Date
Use the USB cable to connect the device in the Standby mode with the computer.
Then the device appears. Click in the root directory with the right mouse button on the
drive. Then click on „New“ and on „Create Text Document“. Then create a text
document file „time.txt“. Then double-click on „time.txt“ and edit as follows:
for display in the picture
2014.07.30 08:51:30 (Date and Time)
Enter this information like this and save it.
no display in the picture
2012.07.26 08:51:30 (Date and Time in the past)
Enter this information like this and save it.
Setting video resolution
Use the USB cable to connect the device in the Standby mode with the computer. The
drive of the computer appears. Click in the root directory with the right mouse button
on the computer drive. Then click on "New" and on create a "Text document". Then
create the text document file "size.txt". Then double click on "size.txt".
For a video resolution 1280x720P with 50fps enter the number “1”.
For a video resolution 1920x1080P with 25fps enter the number "0".
For a video resolution 1440x1080P with 30fps enter the number "2".
Save and exit!
The system will be default with 1440x1080P 30fps specifications.
Viewing a video
If you plan on viewing your files on your computer, we suggest using VLC Player. The
most recent version can be downloaded at no cost from
http://www.videolan.org
Troubleshooting
Q:
The device seems to have frozen and don’t reacting when any buttons are pressed.
A:
This usually occurs if the device receives too many commands in too short a time.
To reset the device, press the ON/OFF button for a few seconds until the device will
turn OFF.
Q:
The device’s red LED is blinking faster for 10 seconds and then it turns off
automatically. The device goes into stand-by mode.
A:
It occurs when the MicroSD card is full. Store the information to other storage
media and empty your current MicroSD card.
