The device goes into standby mode. In standby, press ON/OFF
once, the BLUE light flashes for 3 times and then turns off. The
device starts recording. Video files are saved every 5 minutes. The
video file will be saved sequentially until the memory is full. When
the memory is full the loop function will delete the oldest file and
saves the newest. Press the button ON/OFF once to stop recording
and return to the standby mode. The BLUE light is on.
Note: When the device is in standby mode (BLUE light is always
on): no operation
it turns off automatically after 1 minute.
Automatic Photo Mode
The lag (5–60 seconds) of the photos need to be chosen by the
time.txt file. To activate the automatic photo recording long press
the ON/OFF button. The red and blue light is ON and the device
starts up. Then the red light turns off, and the blue light stays on.
The device goes into standby mode.
Press the M button once, the red light turns on and enters the
automatic photo mode. The camera takes one photo every X
seconds depending on the lag that is set. To change the mode
press the M button. To power off the device hold and press
ON/OFF button for 5 seconds.
Motion Detection Mode
The resolution (1080p/720p) of the video needs to be chosen by
the time.txt file. To activate the motion detection recording long
press the ON/OFF button. The RED and BLUE light is ON, and the
device starts up.
Then the red light turns off and the blue light stays on. The device
goes into standby mode. Press the M button twice, the red and blue
light will flash alternately until they turn off. The motion detection
mode is entered and activated. Does the device detect a moving
object, the red and blue light will turn off. When the recording has
finished the red and blue LED turn on again until new motion is
detected.
