Diagram 2 & 3
Measure and mark the horizontal position according to diagram 2.
The outer most left and most right sensor should ideally be 15m
–
20cm away from the edge of the bumper. Locate the Center Line
and mark the position of the remaining sensors and according to or
to the near approximation of diagram 3.
NOTE:
Try to locate a flat surface for the mounting of the sensors.
Once it is completed it should appear similar to diagram 1.
Diagram 2
Diagram 3
Rear Sensors A, B, C, D
should be mounted from
left to right with A being the
leftist side and D being the
rightist side.
