12
Securely connect the red wire to the positive terminal (“+”) of the battery.
Securely connect the black wire to the negative terminal (“-”) of the
battery. The external siren will make a brief alarm sound when it is
correctly connected to the vehicle’s battery.
Fix the siren by attaching it to non-movable parts and mount it in suitable
position.
Inserting the car alarm in the cigarette lighter socket
After the car alarm is inserted in the cigarette lighter socket, the light will
glow solid blue for charging. The device is now ready for operation and
can receive the command from the remote control.
Depending on the current status of the car alarm’s LED indicator, the
light will glow in one of the colors below:
Status
LED Indication
Charging
Solid blue
Charged
Sold green
Low battery warning
Flash blue continuously
Alarm
Flash red continuously
Activated
Flash red once with “beep”
Deactivated
Flash red twice with “beep beep”
Armed
Flash red every 5 seconds
Power off
Flash red continuously with constant,
intermittent beeps: “beep beep beep beep”
When mounting the siren, make sure that the position of the siren
does not interfere with the closing of the engine hood.
Keep the siren far away from the engine. Heat from the engine may
destroy the siren.
Make sure that the excess connection cable is coiled up and
additionally securely fastened in the engine compartment using cable
ties.
The included remote is already paired to the device.
