Starting to use the car camcorder
Placing the MicroSD card:
Insert a MicroSD card into the memory card slot by pushing
it carefully until you hear a “Click” sound. Remove the MicroSD card by pushing it once
and then remove it after it pops out.
Turning ON / OFF:
Press the
POWER button once to power on, blue light
indicator is on. Press the POWER button again to power off, blue light indicator is off.
Attention: Low battery is displayed before shutting down.
Video recording starts when MicroSD card is inserted
; you can stop the video
recording by pressing the OK button for 2-3 seconds. When pressing the OK button
shortly, video recording starts again.
Changing Batteries – 3 ways possible
1. In-car battery charging with 5V charger* for the cigarette lighter (* included)
2. Using USB cable** to charge battery (** included)
3. Using an AC adaptor*** to charge battery (*** not included)
Red light indicator is on while charging. Full charging time is about
3 hours
. Red light
indicator will turn off when the device is fully charged.
Notice:
Therefore a fully charged
battery approx. last about half an hour, it is recommended to plug the camera to the
cigarette ligher socket of a car during usage.
When the camera is fixed on bracket you can rotate it in different directions, the picture
you see on the display always will be in the correct upright position. But in case you
rotate the camera, then record a video and later watch this video on your PC screen, the
file is shown in the rotated position; you cannot (!) change the viewing angle later on the
PC screen.
G-Sensor Function:
In case of a hard impact (e.g. a collision) or a very strong shock
(from 6G, e.g. the car rolls over) the video that is being recorded is stored automatically.
In addition, the video is LOCKED for deletion and an icon will appear on the screen. By
this function, the incident course of events can always be played back later.
Switch between different modes by pressing the MODE button
Setting Mode
System setting:
Press MENU button once, press MENU botton again to enter the
“System Setting” option. A blue background will be displayed.
Format:
Format the MicroSD card (
Attention:
this action will delete all data stored on
the MicroSD card!)
Language setting:
You can choose between.. Confirm by pressing the OK button.
Reset system settings:
Cancel / Proceed. Confirm by pressing the OK button.
Date / Time setting:
Set Date / Set Time. Confirm by pressing the OK button.
