5. HoW to use remote controL
5.1 Button on remote
OFF
ON
R
G
B
W
FLASH
STROBE
FADE
SMOOTH
ON
OFF
PLAY/PAUSE
COLOR
BRIGHT
±
CANDLE
SPEED
WHITE
5.2 replace battery
If the remote control fails to activate the light,
replace the battery by:
1. Remove the old battery by pushing the part
to the right at the back of the remote
control and then pull the part out of the
remote control. (figure 1)
2. Take notice of the “+” and “–” direction of the
battery in correct direction.
3. Insert the battery into the plastic support and
insert this one into the slot, as showed in
figure 2
notice:
Each remote control includes a CR2025
battery, if run out power, you need to buy it by
yourself. Dispose of the old battery responsibly,
using separate refuse collection.
If you will not use the LED Lamp for a long while,
we suggest removing the battery from remote
control.
Each time you need to turn on product before
activating remote control function.
With the CE sign, Techly
®
ensures that the product is conformed to the basic European standards and directives.
The full text of the EU Declaration of Conformity is available on the WWW.TECHLY.COM website in the product
page.
In compliance with EU Directive WEEE this product is marked with this symbol. It means that used electrical and
electronic products should not be mixed with general household waste. There is a separate collections system
for these products in compliance with WEEE directive, otherwise contaminative and hazardous substances can
pollute the environment.
Dim mode
Bright mode
15 colors for selection
White light
Flashing mode
Disco effect
Colors fades off into another color
Colors changes
8 button remote control
24 button remote control
8 button remote control
24 button remote control
8 button remote control
24 button remote control
6. maIntenance for product and accessorIes
cleaning:
It is recommended that after use the products are turned off, rinsed using clean water and dried using a soft cloth.
When not using: Store these products out of reach of children and direct sunlight when not in use.
If you will not use the LED Lamp for a long while, we suggest removing the battery from remote control.
Keep the original external packaging to be used if it is necessary to return the product to the supplier for repair or replacement.
8 button remote control
24 button remote control
MULTICOLOR
LED LAMP
EN
WWW.TECHLY.COM
REMOTE FRONT SIDE
FIGURE 1
FIGURE 2
REMOTE BACK SIDE
