22
hdbitt hdmi extender matrix
Operation mode selection setting
Follow up Figure 7, Click button “Select Mode”, to choose the
mode needed.
FAq
q:
TV display “Waiting for connection” on the right corner:
A:
1) Please check if the power supply of transmitter and switcher
is connected, and make sure all connection is correct and well.
2) Please check and make sure receiver 's channel number is
within transmitter's channel list.
3) Please check and make sure all of the transmitter's channel are
different.
q:
TV display “Please check the transmitter input signal”:
A:
1) please check if there is a HDMI signal input of transmitter;
2) Try to connect the signal source directly to display device to see
if there is signal output from source device, or change the signal
source, HDMI wire and try again.
q:
Display is not fluent, not stable?
A:
1) Please check and make sure your switch is with IGMP function,
and the IGMP function is open.
q:
Black screen or no image on displays?
A:
1) Cut off the input of source device, if TV displays “Please check
the transmitter input signal”after about 10 seconds, please
connect the source again, change and try another resolution.
en
Содержание IDATA HDMI-MX383
Страница 24: ...www techly com ...
