INSTALLATION PROCEDURE
1. Connection
One to one:
HDMI Display
Speaker
RX
USB
Keyboard/Mouse
PC
TX
HDMI Display
Follow the standard of EIA-568B, It is recommended to select a
network cable with less loss and crosstalk.
1-Orange/white
2-Orange
3-Green/white
4-Blue
5-Blue/white
6-Green
7-Brown/white
8-Brown
2. Connection instruction
1) Connect the source device to the HDMI in port of the transmitter
with an HDMI cable, and connect the HDMI out port of the receiver
to the display device with another HDMI cable.
2) Connect the CAT out port of the transmitter and the CAT in port of
the receiver via a network cable (CAT6/CAT6A/CAT7).
3) If using HDMI loop out, connect the display device to the HDMI
OUT port of the transmitter.
4) Plug the power supply into the device to get started.
Note:
It is recommended to use a length range within 2~70m network
cable. If the cable is too short, there may be no display output
because the signal is too strong. If the cable is too long the output
may be with poor quality.
Network
Cable
HDMI IN
HDMI
OUT
EN - 6
WWW.TECHLY.COM
HDMI KVM EXTENDER
OVER NETWORK CABLE
