Techly 8054529027460, Руководство пользователя

Страница: 13 / 48

13
Setting
Enter Setup mode
Press Arm [ ] or Home Mode [ ] on
the keypad to unlock it.
Type [
admin code+# ] to enter Setup
mode.
Default admin code: 123456
Under setup mode, if no operation is made for 30 seconds
the keypad will exit the setup mode automatically. The
Setup mode can also be exited by pressing [ * ].
Exit delay
Detectors start detecting potential intrusions imme-
diately after the system has been armed. To prevent
alarms when you leave your house, an exit delay can be
set up. If you have set up an exit delay, the control panel
will receive the signal to arm the system when you press
the Arm key [ ] on the keypad after the time set.
1. Enter Setup mode.
2. Type [ 33+delay time in # ].
3. You hear one beep: the setus is
successful.
To deactivate the Exit delay, set 0 as
delay time.
Remark
The time is set in seconds, it can be set from 0 to 255.
Default setting: 0.