9
TL-SM3X1-HDV User Manual
www.tlnetworx.com
4.
System Operations
4.1
Front Panel Buttons
The front panel buttons may be used for source selection. Video signals support auto-switching
and manual switching (factory default).
4.1.1
Manual-switching
Press
HDMI 1
,
HDMI 2
or
VGA
on front panel to select the corresponding input source.
4.1.2
Auto-switching
Press
AUTO
to enter into auto-switching mode.
The auto-switching mode abides by the following principles:
Ø
New input
When a new signal (or connection) is detected, the TL-SM3X1-HDV switches to this new
signal automatically.
Ø
Rebooting device
The TL-SM3X1-HDV will save the last configuration before losing power. If the last switching
mode is auto-switching, once rebooted, the TL-SM3X1-HDV will automatically enter auto-
switching mode, then detect all inputs and memorize their connection status for future use.
If the last displayed signal is still available, the unit will output the signal. If not, the unit will
detect all the input signals with priority from HDMI 1 to HDMI 2 to VGA.
Ø
Removing signals
Should an active signal be removed, the TL-SM3X1-HDV
will detect all input signals with
priority from HDMI 1 to HDMI 2 to VGA. It will transfer the first signal detected to the
display.
