22
TL-SM-HDVDP User Manual
www.tlnetworx.com
RS232 Controller
The TL-SM-HDVDP is equipped with a built in RS232 controller, and is able to save RS232 Wakeup
and Standby Commands of the display. This allows you to turn on/off the display through connected
RS232 port using auto-detect source status.
*Check the display model’s user manual for RS232 settings and commands,
RS232 Wakeup Command:
Input the RS232 Wakeup Command of connected display, and click
Save
button.
RS232 Standby Command:
Input the RS232 Standby Command of connected display, and click
Save
button.
Baud Rate:
Set the Baud Rate of connected display.
Parity Bits:
Set the Parity Bits of connected display.
Data Bits:
Set the Data Bits of connected display.
Stop Bits:
Set the Stop Bits of connected display.
Hex String:
Check this option represents the command is Hexadecimal format.
End Flag:
Choose the end flag of command. The command could be end with none, "\r" (carriage
return), "\n" (line feed) or "\r\n" (carriage return/line feed).
RS232 Auto Control:
Enable/disable RS232 Auto-control.
Delay Time (min):
Set the delay time of display on/off after receiving RS232 command. The range is
0~30 minutes.
RS232 Manual Control:
Turn on/off display manually by RS232 command.
