www.tlnetworx.com
TL-DA14-F2 User Manual
5. Firmware Update Procedure
If a firmware update is required for any reason, the process can be completed by
connecting a PC to the Mini-USB port on the front panel of the TL-DA14-F2. Please use
the following procedure to successfully complete the update:
1. Save the firmware file (.bin) and the Firmware Update software in the
same folder on your PC.
2. Power on the TL-DA14-F2, connect it to your PC using a Mini-USB cable.
Please be sure to use a cable that includes the data lines, and not a
‘charging’ cable.
3. Set the ‘Pin 1’ DIP switch to On [↓] (Firmware update mode).
4. Open the Firmware Update software and the TL-DA14-F2 will start the
update process automatically.
5. After the update process is done, the software will show a ‘Success”
message and then close automatically.
6. Set the ‘Pin 1’ DIP switch to Off [↑] (Working mode).
