In the event of a paper jam, please open jamming
release plate
(Fig. H) to remove the jammed
paper(s), then close the jamming release plate.
Fig. E
6. Manual Feed: Max. Loads 3 sheets at a time.
Line up the paper(s) (if 2 or 3 sheets) into the
manual feed slot and release paper(s) to fall
freely into the slot. The infrared sensor inside
the manual feed slot will detect the paper(s)
(this may take a few seconds) and pull the
paper(s) into the unit (Fig. F).
7. The folded paper(s) will come out from the exit,
then fall into the basket (Fig. G).
papers (this may take a few seconds) and pull the
papers into the unit one after another automatically.
IF PAPER JAMS
Fig. F
Fig. G
IMPORTANT SAFETY
INSTRUCTIONS
CAUTIONS
Your safety as well as the safety of others is important
to TECHKO. In this manual as well as on the product
are important safety instructions. PLEASE READ ALL
SAFETY INSTRUCTIONS BEFORE OPERATING.
Do not use solvents, cleaning degreasers
or any chemicals to clean the
.
letter
folding machine
Product is not intended for use by children
(product is not a toy). Keep children and
pets away from letter folding machine.
Always unplug the unit and make sure
the master control switch is on the
OFF
position while not in use in order to
prevent accidents.
Do not operate the unit with a damaged
power supply cord.
Avoid touching the document feed slot
with hands. Never insert hands or fingers
into paper folding slot.
Avoid hair touching the document paper
folding slot. Keep hair/face away from
the document paper folding slot.
Avoid clothing touching the document
feed slot. Keep personal and loose objects
(jewelry, ties, etc.) away from folding slot.
NO HAIR
Keep aerosol products away from letter
folding machine. Do not use flammable,
petroleum-based or aerosol cleaners on
or near this product. Some agents may
combust causing serious injury.
Don't overload paper folder. Maximum 3
sheets at a time.
NO TIE
NO AEROSOL
NO CHILD
MAX. 3 SHEETS
OPERATION
3
Power Overheat
Paper Loading Tray
Manual Feed
lot
S
Auto Feed Slot
Master Control Switch
Jamming Release
Plate
Basket
Adapter
DC 24V
1. Remove the unit from
its
packaging.
2. Make sure the paper loading tray is inserted in
place correctly ( Fig.C / Fig.D). Insert the paper
loading tray into the rear part of the auto feed
slot, and carefully pull out the bottom Basket.
3. Plug into a power outlet and then put the
master control switch in the ON position. The
green power LED light will illuminate.
Fig. A
Fig. B
Fig. C
Fig. D
Operate this letter folding machine with
a 8-15 minutes on, and a 20-30 minutes
off cycle.
Exit
4. Connect the AC adapter with the unit (Fig. B),
then plug the AC adapter with the power source.
Once the power is connected, then the unit is
ready to be used.
5. Auto Feed: Max. loads
sheets at a time and
automatically feeds 1 sheet at a time. Line up
stack of papers well, then pull the paper loading
tray to load papers easily, then release the
paper loading tray (as Fig. E). The infrared
sensor inside the auto feed slot will detect the
40
MODEL:
LF291
