TechGrow Humi DualPro, Руководство пользователя

Страница: 13 / 34

____________________________________________________________________________________________________________________________
Tech Grow | Innovative Growing Solutions 13
8.3 Adjust RH hysteresis
Select “RH +/ - “ and press the PTK.
Adjust the hysteresis by turning the PTK.
Press the PTK to confirm.
Select >> NEXT >> and press the PTK to proceed with
adjusting night mode settings.
8.4 Adjust RH night & night delay
The Humi Dual Pro allows you to set a different setpoint
for night mode. Moreover, it offers night delay to slow
down switching between day and night mode.
Select >> NEXT >> and press the PTK.
You enter the next screen. Select
“RH night” .
Press the PTK and adjust setpoint for night mode.
Press the PTK to confirm.
To set the delay time, select
“NightDel”. Press the PTK.
Turn until the desired amount of minutes (up to 100
minutes). Press the PTK to confirm.
8.5 RH Min/Max
To read the measured RH minimum/maximum values,
select >> NEXT >> and press the PTK.
You enter the next screen:
Select “Reset Min/Max” and press the PTK to reset.
If you press and hold the PTK for 5 seconds while the
main screen is displayed, the RH Min/Max values are also
reset and set to the actual measured value.
Select << BACK << and press the PTK to return to the
main screen.
8.6 CO
2
level
To read the actual CO
2
concentration, press the PTK
once while the main screen is displayed.
To read the Min/Max values, s
elect “CO2” and press the
PTK.
Select “Reset Min/Max” and press the PTK to reset.
Select << BACK << and press the PTK to return to the
main menu.
RH set 56 %
=> RH +/- 8 %
>> NEXT >>
RH set 56 %
RH +/- 8 %
=> >> NEXT >>
=> RH night 60 %
NightDel 5 min
>> NEXT >>
RH night 60 %
=> NightDel 5 min
>> NEXT >>
RH night 60 %
NightDel 5 min
=> >> NEXT >>
RH Min 51 %
RH Max 59 %
Reset Min/Max
<< BACK <<
TMP = 26.1 C
RH = 51 %
=> CO2 = 653 ppm
CO Min 592 ppm
CO Max
853 ppm
=> Reset Min/Max
<< BACK <<