Page 8
4.1 Mounting and removal the WREM 80 LithGH reader
4.1.1 Reader mounting
When mounting the reader it is necessary to unscrew the
front metal plate
of the
Lithos
panel (
pic. 4a
). Then remove the
bottom pushbutton
(
pic. 4b
).
Uncover the plastic strip
(
pic.
4c
) and connect the appropriate wires according to the instructions for standard reader
connection. Lead the rest of the wires through the rear part of the panel (
pic. 4d
). Connect
the cable in the way to be placed under the plastic strip,
insert the reader
in the
bottom
pushbutton position
(
pic. 4e
) and place the plastic strip back again. Fasten the front metal
plate of the panel back again (
pic. 4a
– screw in the opposite way).
4.1.2 Reader removal
When disassembling the reader use a similar procedure as described in the previous
chapter, just remember to
unplug the panel and the reader from the power supply first
!
Pic. 4a
Pic. 4b
Pic. 4c
Pic. 4d
Pic. 4e
