techem smoke detector 2, Руководство по эксплуатации, Страница: 22 / 60

What should I do if the smoke detector’s room
monitoring is activated?
!
If the smoke detector’s room monitoring is activated, the cause
must be rectified as fast as possible.
Causes of malfunction include, for example, all kinds of items in
the vicinity of the smoke detector (e.g. lamps, openly laid electri-
cal cables, room partitions, very high cupboards / shelves). – The
minimum gap from items must be 60 cm – measured from the
outer edge of the SD.
Further causes of malfunction include painting over, masking or
covering the smoke detector.
After you have rectified the cause of malfunction, please press the
user key and move away from the SD within 10 seconds so that
the malfunction cause for the SD can be switched off.
If you are unable to rectify the cause of malfunction, please refer
as fast as possible to the
Techem Hotline: 0 18 02/00 12 64
(6 cents / call from German landlines, max. 42 cents / minute from
German mobile phones).
For safety reasons, keep the doors open to rooms with func-
tional smoke detectors until the cause of malfunction has been
rectified.
The activation of room monitoring is signalled as follows:
Techem radio frequency smoke detector 2 – operating instructions 22