Specifications:
Weatherproof rating:
IPX4
Output Power:
2 x 3 WRMS
Frequency response:
9Hz-18kHz
Impedance:
4 Ohm
Sensitivity:
80dB±2dB
S/N Ratio:
≥65dB
Distortion:
≤1%
Charge time:
3.5-4.5 hours
Use time:
4-5 hours
Power:
1800mAh Li-ion Battery
Dimensions:
186(L) x 62(H) x 56(D) mm
Charging the battery:
-
Open the protective cover on the side of the unit.
-
Plug the charging cable into the charging port, and the other end into a USB
power terminal. The LED indicator will turn red.
-
Once the charging is completed, the LED indicator will turn off.
Bluetooth® pairing:
-
Press and hold the power button to turn on the speaker.
Press it again to turn off.
-
The blue LED will flash along with a ‘beep’ sound to indicate it’s in Bluetooth
mode and ready for pairing.
-
Turn on the Bluetooth® function of your device and search for “XC5219”, select
to pair, and if prompted for a password type “0000”. After the connection is
successful the blue LED will stop flashing.
-
Select the music to play from your device, or use as per the Operation
Instructions below.
NFC (Near Field Communication):
1.
To use the NFC function, you must have an NFC enabled device. Ensure that the
NFC on your device is turned on, and hold your NFC enabled device over the
NFC logo on the speaker.
2.
This will connect your device to the speaker, and any previous devices that were
connected will be disconnected.
3.
Select the music to play from your device, or use as per the Operation
Instructions below.
