NFC (Near Field Communication):
1.
To use the NFC function, you must have an NFC enabled device. Ensure that
the NFC on your device is turned on, and hold your NFC enabled device over
the NFC logo on the speaker.
2.
This will connect your device to the speaker, and any previous devices that
were connected will be disconnected.
3.
Select the music to play from your device, or use as per the Operation
Instructions below.
AUX Link:
1.
After powering on the unit, use a 3.5mm audio cable to connect your music
device with the speaker. The LED on the front will turn red and the speaker
will sound “Under Line-in Mode”.
2.
Select the music to play from your device, or use as per the Operation
Instructions below.
Operation Instruction:
-
Press the
button once to Play and Pause the music.
-
If you press and hold the
button, the Bluetooth® will disconnect and
you will hear “Waiting for Connection”.
-
Press the + or – buttons once to select the previous track or the next track.
-
Press and hold the + or – buttons to increase or decrease the volume.
-
In Bluetooth® mode (doesn’t work with 3.5mm audio cable), when there is
an incoming call, press
to pick up the call, and press it again to hang
up.
