TECH WiFi RS, Руководство пользователя, Страница: 11 / 20

WIFIRS
11
VI. How to configure the module (for older
controller versions
Connecting the module with the controller
ST-505 module cooperates with TECH controllers with RS communication and compatible software. After
the module has been properly connected, activate the Internet module in the Fitter’s menu of the main
controller (Menu >> Fitter’s menu >> Internet module >> ON) and confirm >> IP Address. After a while
the IP address of the module will be displayed (e.g. 192.168.1.192) – it is advisable to copy the address
on a piece of paper as it will be needed later on in the installation process
VI.a) How to log in to the module (local network)
1. Open the Internet browser,
Enter the IP address (e.g. http://192.168.1.192 ) and confirm with enter.
2. Enter the default user name (user) in the window which has opened,
The password space should be left blank. Press OK.
After completing this procedure, the user will be successfully logged in to the module via local network.
VI.b) Protection settings
1. Module protection settings in local network.
Enter a new user name and password.