tech
Module ST-65 GSM, after correct connection with a controller, will
receive valid parameters of its work. These parameters may be sent
back by the module, upon request, in the form of an sms message to
the user. The SMS is sent to any authorized phone number.
After sending to the module phone number the text "
tech
" or an
authorization pin, data with controller working parameters will be sent
back.
[Tech]
e.g.
tech
Namely:
tech
Message of this type will result in sending a return sms with the
current working parameters of the boiler.
No.
name
Value
Temp:
CO
23 (current temperature)
Hot tap water
25 (current temperature)
1
Set CH
60 (set temperature)
2
Set HUW
40. (set temperature)
…
…
...
The quantity and the type of sent data depend on settings and
operation mode of the controller. Particular parameters are displayed in
a new line, the phrases are separated with spaces (the ordinal number
is always separated by a space from the set one).
To change the setting of boiler temperatures using a mobile phone,
send an sms message to the module ST-65 phone number, with the
following content:
[pin authorization] [space] [no. ] [space]
[value]
[;]
e.g.
9999
1
65
;
2
60
;
Namely:
9999 1 65; 2 60;
This command (if authorization pin is set to "9999") will change the
set CH to 65
o
C and the set HUW to 60
o
C.
-
7
-
