61
Icon
Port Name
Function
Alarm input port
ground end
Alarm input ground end.
NO1
~
NO5
C1
~
C5
NC5
Alarm output port
1
~
5
z
5 groups of alarm output ports. (Group 1
:
port NO1
~
C1,Group 2:port NO2
~
C2,Group
3:port NO3
~
C3, Group 4
:
port NO4
~
C4,
Group 5: port NO5, C5, NC5).Output alarm
signal to the alarm device. Please make sure
there is power to the external alarm device.
z
NO: Normal open alarm output port.
z
C: Alarm output public end.
z
NC: Normal close alarm output port.
A
RS485_A port. It is the cable A. You can connect
to the control devices such as speed dome PTZ.
B
RS485 (RS-485)
communication
port
RS485_B.It is the cable B. You can connect to
the control devices such as speed dome PTZ.
CTRL 12V
/
Controller 12V power output. It is to control the
on-off alarm relay output. It can be used to control
the device alarm output. At the same time, it can
also be used as the power input source of some
devices such as the alarm detector.
+12V
/
+12V power output port. It can provide the power
to some peripheral devices such as the camera
or the alarm device. Please note the supplying
power shall be below 1A.
Network port
10M/100M/1000M self-adaptive Ethernet
port. Connect to the network cable.
Please note 54 series has two Ethernet ports.
The 54-8P and 54-16P has one Ethernet port
respectively.
eSATA
eSATA port
External SATA port. It can connect to the device
of the SATA port. Please jump the HDD when
there is peripheral connected HDD.
USB2.0 port.
Connect to USB2.0 storage device , mouse,
burner and etc..
RS232
(
RS-422
)
RS232 debug
COM.
It is for general COM debug to configure IP
address or transfer transparent COM data.
VGA
VGA video
output port
VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
Содержание NVR-ELC-32-DH Series
Страница 66: ...110 Figure 5 55 Figure 5 56 Figure 5 57 ...
Страница 90: ...134 Figure 5 100 ...
Страница 156: ...200 Teclast Ti Cool 512M Teclast Ti Cool 1G Teclast Ti Cool 2G ...