Getting Started
Before proceeding to operate the product as you read through these instructions please
take some time to read and understand the steps and instructions beforehand.
Making a Bluetooth Connection
This pocket Bluetooth speaker is equipped with Bluetooth technology allowing you to
connect to a Bluetooth enabled device and streaming music from this device wirelessly
up to 10 metres away.
Step One
Turn on your Bluetooth speaker by sliding the ON / OFF button on the rear of the
speaker.
Step Two
Once ON, the LED on the front grill of the speaker will flash the colour BLUE. The flash-
ing BLUE LED indicates the speaker is searching for a Bluetooth connection.
Step Three
Using a Bluetooth enabled device such as laptop or smartphone; enter the Bluetooth
settings to search and select the name ‘TN-1’ in the device list. If a password is required
please use ‘0000’
Step Four
Once the connection is successful and stable your speaker will emit 3 short beeps. You
are now ready to enjoy music wirelessly from your connected device.
Important features to know whilst connected
Disconnect the Bluetooth connection and connect to a new device
If you wish to switch to another external Bluetooth device, hold down the PLAY
/ PAUSE button pairing key for 4-5 seconds to cancel current connection. To
connect another device, follow the steps as above.
Your speaker will remain connected to your connected device
Although you may turn OFF your Bluetooth speaker, when turned back on, the
speaker will automatically connect to the last successfully paired device when
turned ON again.
