Tech Lighting ELEMENT E4-L A Series, Руководство по установке, Страница: 6 / 12

6
Install Plaster Ring
(For Flangeless Versions)
Install Drywall
Align the cut out section of drywall with the collar and
install drywall.
2
WARNING: The housing is not Risk of Fire:
intended to be in contact with or covered with
combustible materials and insulation. Do not
install insulation within 3 inches of the housing
sides or above in such a manner to entrap heat.
4A
4-1/2"
ROUND COLLAR
SQUARE COLLAR
4B
2
DRYWALL
COLLAR
JOIST
For round trims , mark a 4-1/2" diameter circle on drywall.
Cut out the marked section.
For square trims , mark a 4-1/2" square on drywall. Cut out
the marked section.
1
4-1/2"
Insert the plaster ring completely into the collar/ceiling
and secure them in place with the provided set screws and
Allen wrench.
1
ROUND PLASTER RING SQUARE PLASTER RING
NOTE : Longer set screws have been provided for
instances where the plaster ring does not reach the
collar and must be secured to the inside of the ceiling
cutout. Use the short set screws if the trim is installed in
the collar.
5A
CUT OUT
1
1
CUT OUT
1
1
SET SCREW
ALLEN
WRENCH
1
SHORT SET SCREW
TAB
TRIM HOLDER
LONG SET SCREW
TAB
CEILING