1.1
Installation Instructions for
Tigris Mirror Oval Surface (Compact Fluorescent)
700BCTIGOS26_-CF
1
920BCTOVSCF
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
Bring 120 Volt power supply to the mirror in accordance
with local electrical codes.
This instruction shows a typical installation.
C AUTION — RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
BATH COLLECTION
Locate the studs on the wall where the mirror is going
to be mounted (Max 22-1/2" separation).
If necessary, use the center hole on the backplate to
position the backplate on the wall.
Use minimum of four slots to mount the backplate to
the studs with four screws and washers provided. Do
not drive the screws all the way in at this time.
1A
Bring the power line to one of the four circular holes on
the backplate.
While holding the backplate level and in the desired
position, tighten the four screws to secure it.
BACKPLATE
1B
POWER LINE
SCREW
STUD
WASHER
CENTER
HOLE
Install the Hardware
1
2
3
1
1
2
3
3
3
3
4
5
4
5
5
5
5
