Tech Controllers ST-292, Руководство пользователя

Страница: 9 / 28

ST-292 User’s manual
9
VI. First start-up
ST-292 v2:
In order for the controller to operate correctly, the user must follow these steps when starting the
device for the first time:
1. Remove the front cover of the controller and insert the batteries.
2. If the room regulator is to control the underfloor heating system, connect the additional
sensor to the floor sensor contact.
3. In the case of ST-292v2 connect the two-core cable to appropriate sockets in the receiver.
4. Check if the current communication channel selected in the regulator is the same as in
the receiver. “35” is the default communication channel in all devices. If there is a conflict
with other devices using radio communication, the user needs to select a different
channel.
ST-292 v3:
In order for the controller to operate correctly, the user must follow these steps when starting the
device for the first time:
1. Remove the front cover of the controller and insert the batteries.
2. If the room regulator is to control the underfloor heating system, connect the additional
sensor to the floor sensor contact.
3. Connect the controller to the heating device using a two-core cable.
ST-292 v4:
In order for the controller to operate correctly, the user must follow these steps when starting the
device for the first time:
1. Insert the batteries
2. If the room regulator is to control the underfloor heating system, connect the additional
sensor to the floor sensor contact.
3. Check if the current communication channel selected in the regulator is the same as in
the external controller. “35” is the default communication channel in all devices. If there
is a conflict with other devices using radio communication, the user needs to select a
different channel.
4. Assign the room regulator to a given zone.
NOTE
One zone may only have one room regulator assigned to it. If more room regulators
are assigned to one zone, the external controller will not work properly.