Tech Controllers EU-T-3.2, Руководство пользователя

Страница: 17 / 20

EU-T-3.2
17
IX. HOW TO REGISTER EU-T-3.2
In order to register the EU-T-3.2 controller, follow these steps:

Press the Registration button on EU-MW-3

Press the Registration button on the EU-T-3.2 regulator
NOTE

The screen must be highlighted to register. To do this, press any button on the panel or click the
registration button. Pressing the registration button again will allow pairing.

Once registration has been activated in EU-MW-3, it is necessary to press the registration button on the
EU-T-3.2 regulator within 2 minutes. When the time is over, the pairing attempt will fail.
If:

the EU-T-3.2 regulator screen displays SUC and all the control lights in EU-MW-3 are flashing simultaneously - the
registration has been successful;

the control lights in EU-MW-3 are flashing one after another from one side to the other - the EU-MW-3 module
has not received the signal from the main controller;

the EU-T-3.2 regulator screen displays ERR and all the control lights in EU-MW-3 light up continuously - the
registration attempt failed.
EU-MW-3
Registration button
EU-T-3.2
Registration button